Overview

Graphiant does not manufacture customized hardware. Graphiant certifies series of hardware families from various manufacturers as supported for network connectivity services. One such device in the 1RU server network appliance family is the Dell PowerEdge XR5610.

The Dell PowerEdge XR5610 is a rugged, powerful short-depth 1U server that is powered by a 4th Generation Intel Xeon® Scalable and Edge-Enhanced processor, making it an ideal solution for the network edge, telecom, retail, manufacturing, military and defense.

The XR5610 base system includes 4x1GB (standard copper) and 4x10/25GB SFP+ (no copper).

There are 4 different rear-accessed configuration options:

A. Base system with no optional NICs installed

B. Base system + 4x25/10Gig Optional NIC

C. Base system + 2x100Gig Optional NIC

D. Base system + 4x25/10Gig Optional NIC + 2x100Gig Optional NIC

Note:
This document will discuss configuration A.

Key Features

32 Core Intel Xeon® Scalable and Edge-Enhanced 6421N Processor (IceLake SP)
iDRAC management platform
4 x 1GB (standard copper), 4 x 10/25GB SFP+ (no copper)
BOSS-2 x M.2 480GB (RAID1), 1 x 960GB NVME SSD Storage
4 x 16GB RDIMM Memory
1 micro-USB Console, 1 USB 3.0
TPM 2.0 support
6 x Cooling Fan

Specifications

Platform
Form Factor	1U 19″ Rack mount (ReadyRails included)
Processor	Intel® Xeon® 6421N Scalable Processor (Ice Lake SP)
Chipset	Intel® C741
System Memory
Technology	DDR5-4800
Installed Memory	4 x 16GB RDIMM, 4800MT/s Single Rank
Socket	8 x 288-pin DIMM.
Networking
Ethernet Ports	4 x 10/25GB SFP+, 4 x 1GB Copper
I/O Interface
LED	Power/Status/Connectivity
Power Button	1 x Power Button in Power Control Panel
Console	Micro-USB
USB	1 x USB 3.0
Display	Mini-DisplayPort
Power Input	Dual, Hot-plug, Power Supply Redundant (1+1)
Storage
HDD/SSD Support	BOSS-2 x M.2 480GB (RAID1), 1 x 960GB NVME SSD
Miscellaneous
Watchdog	Yes
Internal RTC with Li Battery	Yes
TPM	TPM2.0
Cooling
System	6 x Cold-swappable Cooling Fans
Environmental Parameters
Temperature	Operating: 10-35°C (50-95°F) Non-Operating: -40-65°C (-104-149°F)
Humidity (RH)	Operating: 8% RH with -12°C (10.4°F) minimum dew point to 80% RH with 21°C (69.8°F) maximum dew point Non-Operating: 5-95% RH with 27°C (80.6°F) maximum dew point
System Dimensions
(WxDxH)	With bezel: 482.6mm x 489mm x 42.88mm (19 x 19.2 x 1.68 inches) Without bezel: 482.6mm x 464mm x 42.88mm (19 x 18.22 x 1.68 inches)
Weight	Max 11.27kg (24.84 pounds)
Power
Type / Watts	800W, Mixed Mode, NAF Redundant PSUs
Input	AC 120V~240V or 240 HVDC
Certification
Approvals and Compliance	Telco: GR-1089-CORE, GR-63-CORE, SR-3580 (NEBS Level 3), GR-3108-CORE (Class 1); Military: MILSTD 810H, MILSTD 461G///, MILSTD 901E, MILSTD 1474E

Front View (with bezel on)

Front View (without bezel)

Status LED control panel
Drives
Express service tag
Power button
USB 2.0 port
iDRAC Direct (Micro-USB)

Rear View

iDRAC dedicated port
Built-in 4x1 GB (standard copper) ports
PCIe expansion card riser 3 (slot 1 and 2)
Power supply units (PSU1 and PSU 2)
Mini Express Service Tag (MEST)
Built-in 4x25 GbE SFP+ LOM ports (no copper)
Serial port
Mini-DisplayPort
USB 3.0 port
RJ45 Dry Input
System identification button

Status LED Control Panel

Status LED indicators
System health and system ID indicator

Power button control panel

Power button
USB 2.0-compliant port
iDRAC Direct port (Micro-AB USB)
iDRAC Direct LED indicator

Dimensions (WxDxH):

482.6 x 489 x 42.88 mm (with bezel)

482.6 x 464 x 42.88 mm (without bezel)

Front Panel

Item	Ports, Panels, and Slots	Icon	Description
1	Status LED control panel	N/A	Contains the system health, system ID, and status LED. Status LED: Enables you to identify any failed hardware components. There are up to five status LEDs and an overall system health LED (Chassis health and system ID) bar. For more information, see the Status LED indicators section.
2	Drives	N/A	Enables you to install up to 4 x 2.5-inch SAS/SATA/NVMe SSD drives.
3	Express service tag	N/A	The Express service tag is a slide-out label panel that contains Service Tag, iDRAC MAC address and LOM 1 MAC address.
4	Power button		Indicates if the system is powered on or off. Press the power button to manually power on or off the system.
5	USB 2.0 port		This port is USB 2.0-compliant.
6	iDRAC Direct (Micro USB)		The iDRAC Direct (Micro-AB USB) port enables you to access the iDRAC direct Micro-AB USB features.

Rear Panel

Item	Ports, Panels, and Slots	Icon	Description
1	iDRAC dedicated port		It is an RJ45 port. Enables you to remotely access iDRAC.
2	Optional OCP 3.0	N/A	Provides network connectivity and can also be shared with iDRAC when iDRAC network settings is set to shared mode.
3	PCIe expansion card riser 3 (slot 1 and 2)	N/A	Enables you to connect PCIe expansion card installed on riser 3.
4	Power supply units (PSU1 and PSU2)		Indicates the PSU1 or primary PSU.
5	Mini Express Service Tag (MEST)	N/A	The Information tag is a sticker that contains Service Tag and Express Service Code.
6	4 x 25 GbE LOM ports	N/A	Provides network connectivity and can also be shared with iDRAC when iDRAC network settings is set to shared mode.
7	Serial port		Enables you to connect a serial device to the system. Note: The serial port is a micro USB type port. It only supports serial connection functions. The serial port does not support any USB functions.
8	Mini-DisplayPort		Enables you to connect a display device to the system. Note: Use a certified Mini-DisplayPort to DisplayPort cable complying with VESA DisplayPort standards for video output with a monitor. Note: Mini-DisplayPort to VGA or Mini-DisplayPort to HDMI adapters are not recommended.
9	USB 3.0 port		This port is USB 3.0-compliant.
10	RJ45 Dry Input	N/A	It is an RJ45 Dry Input port. Enhance penetration in the IoT space. These are interruptible inputs to iDRAC. Dry means that no energy is supplied to the contacts.
11	System identification button		Press the system ID button: To locate a particular system within a rack. To turn the system ID on or off. To reset iDRAC, press and hold the button for more than 16 seconds. Note: To reset iDRAC using system ID, ensure that the system ID button is enabled in the iDRAC setup. If the system stops responding during POST, press and hold the system ID button (for more than 5 seconds) to enter the BIOS progress mode.

Status LED Control Panel

Item

Indicator, Button, or Connector

Icon

Description

1

System health and system ID indicator

Indicates system health (see System health and system ID indicator codes chart below).

2

Status LED indicators

N/A

Indicates the status of the system (see LED indicator chart below).

System health and system ID indicator codes

System Health and System ID Indicator Code	Condition
Solid blue	Indicates that the system is powered on, is healthy, and system ID mode is not active. Press the 'system health and system ID button to switch to system ID mode.
Blinking blue	Indicates that the system ID mode is active. Press the system health and system ID button to switch to system health mode.
Solid amber	Indicates that the system is in fail-safe mode.
Blinking amber	Indicates that the system is experiencing a fault. Check the System Event Log for specific error messages.

Status LED indicators and descriptions

Icon	Description	Condition
	Drive indicator	The indicator turns solid amber if there is a drive error.
	Temperature indicator	The indicator turns solid amber if the system experiences a thermal error (for example, the ambient temperature is out of range or there is a fan failure).
	Electrical indicator	The indicator turns solid amber if the system experiences an electrical error (for example, voltage out of range, or a failed power supply unit [PSU] or voltage regulator).
	Memory indicator	The indicator turns solid amber if a memory error occurs.
	PCIe indicator	The indicator turns solid amber if a PCIe card experiences an error.

Power button control panel

Item	Indicator or Button	Icon	Description
1	Power button		Indicates if the system is powered on or off. Press the power button to manually power on or off the system. Note: Press the power button to gracefully shut down an ACPI-compliant operating system.
2	USB 2.0-compliant port		The USB port is 2.0-compliant. This port enables you to connect USB devices to the system.
3	iDRAC Direct port (Micro-AB USB)		The iDRAC Direct (Micro-AB USB) port enables you to access the iDRAC direct Micro-AB USB features. Note: You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. Cable length should not exceed three feet (0.91 meters). Performance could be affected by cable quality.
4	iDRAC Direct LED indicator	N/A	The iDRAC Direct LED indicator lights up to indicate that the iDRAC Direct port is actively connected to a device.

Edge Performance Results

Summary

Dell Edge Performance Results

Dell VEP1425

Dell XR5610

Virtual Edge Performance Results

KVM