---
title: "Configuring Traffic Policies"
slug: "configuring-traffic-policies"
description: "Configure and deploy Traffic Policies in the Graphiant Portal to manage your network Edge and WAN effectively with detailed setup instructions."
updated: 2026-07-17T16:40:45Z
published: 2026-07-17T16:40:45Z
canonical: "docs.graphiant.com/configuring-traffic-policies"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.graphiant.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Configuring Traffic Policies

## Traffic Policies in the Graphiant Portal

From within the Graphiant Portal, you can configure and deploy Traffic Policies between your network Edge and the WAN.

### Step 1: Locating Traffic Policies in the Graphiant Portal

From the Home screen, navigate to the Edge Configuration screen by one of the following:

- **Locate the "Configurations" section within the “Quickstart” area of the screen; select 'Configure Edges'.**

or

- **Click 'Configure' in the sidebar; select 'Devices'.**

![](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/image(826).png)

This will take you to the ‘Configuration’ page of the Graphiant Portal where you can view all Active, Staged, and Deactivated Edges. From here you can select among the Active Edges which Edge(s) you would like to be configured with Traffic Policies.

On the left-hand side, **select and click** the Edge you wish to manage under **the column 'Hostname**.'

![Device configuration interface showing activated status and hostname details for a network edge.](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/demo-edge config homepage(2).png)

This will take you onto a Configuration page for the Edge you chose.

Here you will see a list of headings along the left hand side of the page, such as ‘Configure Network’, ‘Configure Services’, ‘Configure Policies’, etc.

Select and **click ‘Configure Policies’** from here, and a dropdown menu will appear.

![](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/configuring-traffic-policies-image-ed80g0g2.png)

From the dropdown menu, **select and click ‘Traffic’**.

![](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/configuring-traffic-policies-image-nnmfbu94.jpg)

This will take you onto a Traffic page dedicated to the chosen Edge.

On the Traffic page, you will see two available headings along the top: ‘Rules’ and ‘LAN Segments’.

**Select and click ‘Rules’**.

![Interface showing traffic policy settings with highlighted 'Rules' section for configuration.](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/traffic policy page(1).png)

### Step 2: Setting Up Traffic Policy Rules in the Graphiant Portal

#### Option 2A: Local Traffic Policy

This will take you to the 'Traffic Policy' page. From there, navigate to the '**Local Configuration'** tab.

To add a Rule to the Rule set, **select and click the (+) icon on the right-hand side.** Since nothing is currently configured on the LAN segment, you can also select '**Add Local Traffic Ruleset'.**

![](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/image(883).png)

**Add a Ruleset name (required)**, and if desired, a description. Additionally, select '**Add Rule'** on the right-hand side.

![Configuration settings for traffic policy with highlighted name and add rule button.](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/TrafficPolicyRuleSet, add rule.png)

Whether adding a new Rule or editing an existing Rule, a pop-up window will appear containing four headings: ‘General’, ‘Match Source & Dest’, Match Application’, and ‘Action’. Each heading pertains to a separate set of required fields.

The first heading you will need is **‘General’**.

Below are descriptors for each of the fields required.

(An ***** indicates a required field.)

- **Rule Details**
  - **Sequence Number:** Choose a desired sequence number for the Rule.

![Form section for adding a general rule with sequence number and description fields.](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/add rule general.png)

The next heading is **‘Match’**.

For **Source & Dest:** below are descriptors for each of the fields required.

(An ***** indicates a required field.)

- **Prefix***
  - **Source*:** Enter the Source IP Address
  - **Protocol:** Choose the desired Protocol from the dropdown menu
  - **Destination:** Enter the Destination IP Address
  - **DSCP:** Choose the desired DSCP (values 0-63)

> [!NOTE]
> Note:
> 
> The fields below will be either permitted/blocked depending on the choices made in the Prefix section above.

- **Port**
  - **Source*:** Enter the Source Port number
  - **ICMP Type:** Choose the desired ICMP Type; If not choosing
  - **Destination:** Enter the Destination Port number

**For ‘Match Application’**, below are descriptors for each of the fields required.

- **Application:** Choose the desired Application from the dropdown menu.
- **DSCP:** Choose the desired DSCP (values 0-63)

![Configuration options for source and destination settings in a network application interface.](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/add rule match.png)

**For the final heading of ‘Action’,** below are descriptors for each of the fields required.

- **Logging:** Choose either ‘Off’ or ‘On’.
- **DSCP Remarking:** Enter the desired DSCP Remarking (value 0-63).
- **Service Class:** Choose the desired Service Class from the dropdown menu.
- **WAN Circuits:** Choose either ‘Graphiant Core’ or ‘DIA’.
- **Preferred Primary Circuit:** Choose the desired Circuit from the dropdown menu.
- **Preferred Backup Circuit:** Choose the desired Backup Circuit from the dropdown menu. If only 1 circuit was present for selection in 'Preferred Primary Circuit', this field will not be active.

Once you have filled-in the required fields for each of the four headings described above, **select and click ‘Save’** in the bottom right-hand corner of the window.

![Settings interface showing action options and save button for network configuration.](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/add rule action.png)

#### Option 2B: Global Traffic Policy

**From the 'Traffic Policy' page,** navigate to the '**System Objects'** tab and select '**View Rule Set Configuration**'.

![](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/image-1784068682346.png)

On the **right-hand side at the top of the page, select 'Create Traffic Ruleset'.**

![](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/image(887).png)

**Add a Ruleset name**, and if desired, a description. Additionally, select '**Add Rule'** on the right-hand side, and continue creating the ruleset **as described in Section 2A.**

#### Applying a Rule Set to a LAN segment

After saving the new Rule Set, **switch to the 'Lan Segments' Tab.**

![Configuration settings for traffic policy and LAN segments in network management interface.](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/Screenshot 2026-07-09 at 3.30.35 PM.png)

**Select the desired LAN Segment** to which the Rule will be applied.

![](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/image(874).png)

Click '**Select Rule Set'** if there are no rules to be shown yet, and select the Rule set to apply to the LAN segment.

![Interface showing no rules, prompting to select a rule set for LAN segment.](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/Screenshot 2026-07-09 at 3.34.19 PM.png)

**Select the Rule Set** that was just created and select '**Apply**’.

![Selected rule set named 'new-ruleset-0' with two rules displayed in a table.](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/Screenshot 2026-07-09 at 3.36.10 PM(1).png)

### Step 3: Review & Apply

Once all required fields are filled in, the selected Edge will be ready to begin utilizing Traffic Policies, however you will first need to review and apply all changes made.

![](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/configuring-traffic-policies-image-u0uhcnfs.jpg)

On the top right hand corner, **choose from the following options**:

- ‘**Discard**’ to discard changes made
- ‘**Save as Draft**’ to save changes made to be implemented at a later time
- ‘**Review**’ to review and apply changes made for immediate deployment

## Matching O365 for Traffic Policies

Microsoft O365 uses multiple underlying applications for all the capabilities to work. In order to match O365 using a traffic policy you will need to configure the policy to **match both Office 365 and Microsoft Services.**

**Navigate to the traffic policies page in the Graphiant Portal** (For details please look at the [Locating Traffic Policies](/v1/docs/configuring-traffic-policies#step-1-locating-traffic-policies-in-the-graphiant-portal) section).

You can either create a new Rule Set or edit one of your existing Rule Sets.

To add a Rule to the Rule Set, **select and click the (+) plus icon** on the right hand side of the page within the lower section.

![](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/image(883).png)

A pop-up window will appear containing four headings : ‘General’, ‘Match Source & Dest’, Match Application’, and ‘Action’.

In the General section **add a Rule Name*** and if desired, add a **Description**.

**Switch over to the Match Application tab**, and **select Office 365;** **click ‘Add Rule’**.

![Office 365 application selection with a dropdown for DSCP options.](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/office365.png)

The Office 365 Rule is now seen in the list of rules.

![](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/image-1784068274175.png)

**Select and click 'Add Rule'** again to add the **Microsoft Services** application.

In the General section **add a Rule Name** and if desired, add a **Description.**

**Switch over to the** **Match Application tab; select ‘Microsoft Services’.**

**Click 'Add Rule'.**

![Selection options for Microsoft Services and DSCP attributes in a user interface.](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/microsoft services.png)

You will now see both Office applications present in the Rule list.

![](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/image-1784068363470.png)

Once all required fields are filled in, the selected Edge will be ready to begin utilizing Traffic Policies, however you will first need to review and apply all changes made.

![](https://cdn.document360.io/d86ecd1c-49f6-4fac-83cc-5e344f28f84f/Images/Documentation/configuring-traffic-policies-image-w6gznvzq.jpg)

On the top right hand corner, **choose from the following options**:

- ‘**Discard**’ to discard changes made.
- ‘**Save as Draft**’ to save changes made to be implemented at a later time.
- ‘**Review**’ to review and apply changes made for immediate deployment.